Jual flow meter Oval gear ogm merk met-flo 1 inch 25a
Jual flow meter Oval gear ogm merk met-flo 1 inch 25a
ⅠUsage The OGM Series Flow Meter has incorporated the oval rotor principle into its design. This has proven to be a reliable and highly accurate method of measuring flow. Exceptional repeatability and high accuracy over a wide range of fluid viscosities and flow rates are features of the OGM Series flow meter design. It is mainly applying in petroleum products, not suitable for corrosive liquid.
ⅠWorking Principle When fluid passes through the meter, rotors turn. The gear located on top of one of the rotors drives the mechanical registers gear train which provides an accurate readout.
| Model | OGM-25 |
| Size(inch) | 1″ |
| Min. Flow Rate L/min | 20 |
| Max. Flow Rate L/min | 120 |
| Accuracy（%） | ±0.5% |
| Repeatability （%） | ≤0.03% |
| Max. Viscosity CPS | 1000 |
| Max. Operating Pressure MPa | 3.4 |
2.For pump applications ensure pipe work has the appropriate working pressure rating to match the pressure output of the pump.
3.Install a wire mesh strainer basket type 60 mesh as close as possible to the inlet side of the meter.
4.Ensure that the meter is installed so that the flow of the liquid is in the direction of the arrows embossed on the meter body.(See Fig. 3)
